Miniature Furnace Type, Temperature Range: Up to 350°C, LED 4-digit Display.
Temp. Range
Ambient to 350°C
Display
3 Digits
Go to Description...
Miniature Furnace Type, Temperature Range: Up to 350°C, LED 4-digit Display.
|
Temp. Range |
Ambient to 350°C |
|
Display |
3 Digits, 4 digits |
|
Resolutions |
1°C |
|
Temp. Sensor |
Grade “A” PT-100, Platinum Sensor |
|
Sample Capacity |
One Sample, Capillary Dimension 1.4 mm |
|
Temp. Control |
Microprocessor Controlled closed loop PID |
|
Power Supply |
230V ±10% AC, 50HZ |
|
Ramp Rates |
2°C to 10°C/minutes (Selectable Auto-Low-High) |
|
Power Supply |
Auto Determination of melting point |
|
The instrument basically consists of a miniature furnace with Auto controlled heating rate arrangement, an air circulating arrangement and a digital temp. Indicating circuitry with necessary controls, When the "Start* key is pressed, heating starts. There is Auto detection of Opto-coupled light transmission system, when sample melts, photodiode detects the signal and Melting Temperature put on hold / latched on display automatically. The furnace becomes off and the cooling fan ON simultaneously. The instrument gives audio & visual indications, on reaching the temperature at which the sample melts. |
|
The Melting Temp. of the sample remain displayed on the panel till the "RESET" switch is operated. Not Suitable for Dark Colored Samples. Opto-coupled light transmission based, Sample required to be transparent at the time of melting.
OPERATION: Fully Automatic "Sample Fill and Forget": All the selection of programming is fully protected from power failure including "HOLD" action of melting temperature. Once the start action is initiated, it will reach to find out the melting point of sample, even multiple time power failure.
| color | black, blue, red |
| size | L, M, S |
1 × $100.00
1 × $80.00
